2 Wiring Diagrams – 2 DiMarzio Humbuckers

By
SirJamsalot
– June 9, 2011Posted in: Do It Yourself

I purchased a Megaswitch – P (5 way switch) from Stewmac to replace my old switch and realized after a nice email exchange with DiMarzio’s support that the switch configuration on that switch won’t give me the flexibility I want for my DiMarzio humbuckers. So I ordered a new 5-way switch today – the EP1112.

DiMarzio was nice enough to give me two wiring diagrams that i will share with you, for those of you who are considering a DiMarzio  2-humbucker configuration, and one for those of you who, like myself,  purchased a MegaSwitch-P but aren’t quite sure how to get it wired correctly for your DiMarzio Humbuckers.

These diagrams assume you have a single volume pot, a single tone pot and two DiMarzio humbuckers.

 

 

 

 

 

 

 

 

 

 

And the MegaSwitch-P from stewmac

Note that this configuration is very limited, but will get you a full neck and full bridge positions.

 

 

 

 

 

 

 

 

 

 

Hope this is of use to someone.

About SirJamsalot

I'm just a musician looking to share what I've learned through the years. I've found that sharing is the best of means of learning.